Assembly on Wire Rope

up to 4mm external diameter

Safety Warning:
Do not expose to open flame.
Heat resistant up to max. 60°C.

Hold the wire rope loosely and slide it through the groove of the lamp holder.

Turn the latter a little to make the holder tube slide smoothly over the rope.

After entering the rope, put the cutouts of the tube on the holder ring of the three grate chains.

In order to centre the lamp holder on the rope, now press the distance holder (the small black rubber block) at its notch on the rope

and shove it into the holder tube.

Individual height adjustment:
Just pinch the attached locking ring on the chain or rope below the lamp holder.

Now you can put on the lights by turning.

Enjoy your barbecue!